| Customization: | Available |
|---|---|
| Application: | Motor, Motor, Insulators, Electrical Winding Insulation, Winding Wire Coating Insulation, Electrical Base, Shell, Insulating Varnish, Switch Baseplate, Wide Application |
| Color: | Yellow |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1. PMP insulation paper application
Polyester film capacitor paper soft composite foil is an insulating material product made of a layer of polyester film coated with adhesive in the middle of the upper and lower layers of capacitor paper, referred to as PMP.
2. PMP insulation paper technical parameters
|
Parameter name |
Specification Unit |
|||
|
Product Name: |
PMP grade high temperature insulation paper |
|||
|
Insulation Material Color: |
Yellow |
|||
|
Insulation paper grade: |
Class F , 155 ° C |
|||
|
Normal adhesion: |
No delamination |
|||
|
Hot adhesion (200±2°C, 10min) |
No delamination, no blistering, no glue |
|||
|
Insulation paper thickness: |
0.15±15 MM |
0.17±15 MM |
0.20±15 MM |
0.23±15 MM |
|
Quantitative insulation paper: |
145 gsm |
181 gsm |
218 gsm |
286 gsm |
|
Nomex thickness: |
50 μm |
50 μm |
50 μm |
50 μm |
|
Film thickness: |
25μm |
50μm |
75μm |
125μm |
|
Breakdown voltage: |
≥7 KV |
≥9 KV |
≥12 KV |
≥19 KV |
|
Breakdown voltage after bending: |
≥ 6KV |
≥ 8 KV |
≥ 11 KV |
≥17 KV |
|
Pulling strength (longitudinal): |
≥ 120N/CM |
≥ 160 N/CM |
≥180N/CM |
≥200 N/CM |
|
Pulling strength (lateral): |
≥ 70N/CM |
≥ 90N/CM |
≥ 120N/CM |
≥ 150N/CM |
|
Elongation (longitudinal): |
≥15% |
≥17% |
≥17% |
≥12% |
|
Elongation (lateral): |
≥15% |
≥17% |
≥17% |
≥12% |
3. PMP insulation paper Features
1. The color is uniform, the surface is smooth and flat, and the color does not fade.
2. Odorless, tasteless, non-toxic, smooth surface, good flexibility, no water ripples on the surface, no crystal points, no double phase whitening, good impact resistance strength (good impact resistance strength at low temperature).
3. Corrosion resistance, excellent insulation, excellent mechanical properties, high rigidity, hardness and toughness, puncture resistance, friction resistance, small thickness tolerance, low thermal shrinkage rate, firmness, low shrinkage, low water absorption, smooth and shiny surface , Creep resistance, fatigue resistance, friction resistance, dimensional stability are very good, high temperature and low temperature resistance, high chemical resistance, oil resistance, good air tightness and fragrance retention, and is also a commonly used barrier property One of the composite film substrates.
4. PMP insulation paper storage
Insulation paper should be stored in a ventilated, dry and clean room temperature (below 40°C) environment. During transportation and storage, attention should be paid to fire, moisture, pressure and sun protection. The storage period at room temperature is 12 months, and it can still be used after passing the technical requirements of the storage period.
5. PM insulation paper picture show
7. Information needed for insulation material inquiry
It will be better if customer could send us detailed drawing including below information.
a. Insulation material type: insulation paper, wedge, (including DMD,DM, polyester film, PMP,PET, NHN , NMN ,PM ,Red Vulcanized Fiber,)
b. Insulation material dimension: width, thickness, tolerance.
c. Insulation material thermal class: Class F, Class E, Class B, Class H , Class C
d. Insulation material applications
e. Required quantity: normally its weight
f. Other technical requirement.
NIDE can supply different types of insulation materials for stator or armatures, such as insulation paper and wedge with different class degree. DMD Class B/F, DM Class B/F, Polyester film Class E, Red Vulcanized Fiber Class A, NH& NHN, etc
About Motor component and accessories
NIDE can supply the full range of electric motor components such as commutator, ball bearing, thermal protector, carbon brush, insulation paper, shaft, magnet, fan, motor cover,etc.
){kind=link}