This stator coil winder is CE certificated. The coil winding machine can be used to wind various types of stators. This stator winding machine is with single winding head and two operation stations. During the winding machine running, all the winding process will be done by machine automatically. It greatly improve the working effieciency.
Machine will automatically put the coil into transfer former orderly; especially suitable for high slot filling rate, small notch stator; winding mode such as automatic skip, automatic cutting and automatic indexing can be finished at a time successively; parameter could be set in human-machine interface, winding tension is adjustable; obtain continuous/discontinuous winding way and meets the 2 poles, 4 poles and 6 poles coils winding,
I. Technical data
Wire diameter range
Max winding speed
1800 X1100 X2200mm
II. Main components
Servo motor: Mitsubishi
Control system: Yitu Taiwan
Switch and Button: Schneider
Other electric parts: Delixi /Schneider
III. Machine main function and characteristic
l. Winding tooling: each machine has one set winding tooling and three vertical winding forms.
2. The whole set of tooling can be changed, and it takes about 15min.
3. The turntable is two stations structure. It adopts servo system to rotate and index transfer form.
4. Allow three wires winding simultaneously.
5. Main spindle is controlled by servo motor. The coil turn number accuracy is ±1 turn.
6. The working rotation speed can be set. Machine has no distinct vibration and noise.
6. Free of enamel damage and wire snap. Once the copper wire is run out, machine will automatically stop.
7. PLC can set turn number, winding speed, tooling sunk height, tooling sunk speed and winding direction.
8. X and Y spindle of wire hooker and wire cutter adopts servo system. It can adjust the length of bridge wire and lead wire.
9. Tooling sunk adopts servo system. The max segment number of tooling sunk is 6.
Vertical type coil winding machine