- Model NO.: BXIL2-160/190
- Working Station: Single
- Max Winding Height: 60mm
- Power Supply: 220V
- Size: Middle Size
- After-Sales Service: Overseas Service Center Available
- Transport Package: Plywooden-Case
- Origin: China
- Machine Condition: New
- Stator ID: 35-120
- Air Pressure: Less Than 0.4MPa
- Frequancy: 50-60Hz
- Machine Color: Ral9010 or as Per Customer Requirement
- Trademark: NIDE
- Specification: customized
- HS Code: 8479819000
This end lacing machine is especially applied to multi sizes, low output or more lead stator winding lacing. Stator is loaded on this coil lacing machine vertically. The stator coil laicng wokring process, such as single-needle and single-side automatic lacing; needle transpositioning, hooking, are all controlled by servo system. Machine is PLC programming, with an inverter drive and can be fully programmed to suit different stator slot configurations. The lacing type, like slot by slot lacing, intercal lacing, and fancy lacing could be set in the touch srceen.
|Statro OD||less than 190mm|
|Stator lamination height||40-160mm|
|Max winding height||60MM|
|Lacing mode||slot by lsot/interval slot/fancy lacing|
This machine is suitable for stator used in induction motor industry. This lacing manchine is especially applied to multi sizes, low output or more lead stator winding lacing.
Information needed for stator lacing machine inquiry
It will be better if customer could send us detailed drawing including below information.
1. Stator lamination drawing
2. Stator stack drawing
3. Stator winding drawing
5. Other technical requirement
If possible, it will be better if customer can send us samples.