H Class Insulating Paper Aramida

• Application: Insulators, Electrical Winding Insulation, Winding Wire Coating Insulation, Electrical Base, Shell, Motor, Insulating Varnish, Switch Baseplate, Wide Application
• Type: Insulation Paper
• Chemistry: Polyester Film+Electrical Insulation Paper
• Material: Polyester Film+Electrical Insulation Paper
• Thermal Rating: H 180
• Maximum Voltage: 7-19 Kv
• Model NO.: NDPJ-JYZ-6640
• Classification: Hybrid Insulation Materials
• Certification: ISO9001
• Color: Light Yellow
• Brand: Nide
• Name: Pm Motor Insulation Material
• Dimension: Customized
• Layer: Two
• Storage: Away From Other Humid Material
• Thermal Class: H
• Usage: Motor
• Thickness: 0.15-0.47mm
• Transport Package: Pallet Suitable for Sea Transportation
• Specification: customized
• Trademark: NIDE
• Origin: China
• HS Code: 8503009090
• Production Capacity: 100000

Product Description

Slot Liner Insulation Transformer Layer Insulation H Class Insulating Paper Aramida

1. 6640 Transformer Insulation Paper application
H-grade NMN Aramid Paper is a three-layer composite foil, of which the outer two layers are NOMEX® insulating paper from DuPont, and the inner layer is an electric shock film, which has excellent dielectric properties, flame retardant properties, mechanical properties and high heat resistance. , suitable for slot insulation, turn-to-turn insulation and gasket insulation of H-class motors

2. 6640 Transformer Insulation Paper technical parameters

Parameter name	Specification Unit
Product Name:	H grade high temperature insulation paper
Insulation Material Color:	Light yellow
Insulation paper grade:	Class H, 180 ° C
Normal adhesion:	No delamination
Hot adhesion (200±2°C, 10min)	No delamination, no blistering, no glue
Insulation paper thickness:	0.15±15 MM	0.17±15 MM	0.20±15 MM	0.23±15 MM
Quantitative insulation paper:	145 gsm	181 gsm	218 gsm	286 gsm
Nomex thickness:	50 μm	50 μm	50 μm	50 μm
Film thickness:	25μm	50μm	75μm	125μm
Breakdown voltage:	≥7 KV	≥9 KV	≥12 KV	≥19 KV
Breakdown voltage after bending:	≥ 6KV	≥ 8 KV	≥ 11 KV	≥17 KV
Pulling strength (longitudinal):	≥ 120N/CM	≥ 160 N/CM	≥180N/CM	≥200 N/CM
Pulling strength (lateral):	≥ 70N/CM	≥ 90N/CM	≥ 120N/CM	≥ 150N/CM
Elongation (longitudinal):	≥15%	≥17%	≥17%	≥12%
Elongation (lateral):	≥15%	≥17%	≥17%	≥12%

3. 6520 Transformer Insulation Paper Features
1. The color is uniform, the surface is smooth and flat, and the color does not fade.
2. Odorless, tasteless, non-toxic, smooth surface, good flexibility, no water ripples on the surface, no crystal points, no double phase whitening, good impact resistance strength (good impact resistance strength at low temperature).
3. Corrosion resistance, excellent insulation, excellent mechanical properties, high rigidity, hardness and toughness, puncture resistance, friction resistance, small thickness tolerance, low thermal shrinkage rate, firmness, low shrinkage, low water absorption, smooth and shiny surface , Creep resistance, fatigue resistance, friction resistance, dimensional stability are very good, high temperature and low temperature resistance, high chemical resistance, oil resistance, good air tightness and fragrance retention, and is also a commonly used barrier property One of the composite film substrates.

4. 6520 Transformer Insulation Paper storage

Insulation paper should be stored in a ventilated, dry and clean room temperature (below 40°C) environment. During transportation and storage, attention should be paid to fire, moisture, pressure and sun protection. The storage period at room temperature is 12 months, and it can still be used after passing the technical requirements of the storage period.

 

6. 6640 Transformer Insulation Paper picture show

 

7. Information needed for insulation material inquiry

It will be better if customer could send us detailed drawing including below information.

a. Insulation material type: insulation paper, wedge, (including DMD,DM, polyester film, PMP,PET, NHN , NMN ,PM ,Red Vulcanized Fiber,)

b. Insulation material dimension: width, thickness, tolerance.

c. Insulation material thermal class: Class F, Class E, Class B, Class H , Class C

d. Insulation material applications

e. Required quantity: normally its weight

f. Other technical requirement.

 

NIDE can supply different types of insulation materials for stator or armatures, such as insulation paper and wedge with different class degree. DMD Class B/F, DM Class B/F, Polyester film Class E, Red Vulcanized Fiber Class A, NH& NHN, etc


About Motor component and  accessories

NIDE can supply the full range of electric motor components such as commutator, ball bearing, thermal protector, carbon brush, insulation paper, shaft, magnet, fan, motor cover,etc.