- Model NO.: RQ01-100
- Wire Diameter: 0.31-1.2 mm
- Machine Dimension: (L)2000*(W)1100*(H)2200
- Air Pressure: 0.6~0.8MPa
- Temperature: 0~40oc
- Trademark: NIDE
- Origin: China
- Stator Stack Length: 30-140 mm
- Machine Weight: 4500kg
- Power Source: 380V Three Phase Four Wires
- Power: 20kw
- Name: Coil Winding and Inserting Machine
- Specification: 4500kg
- HS Code: 8479811000
This machine is designed for electric motor stator winding and inserting, 4 working stations complete the winding, making wedge and inserting, it has 2pcs winding stations, 1pc wedge making station and 1pc inserting station.
Winding station: the winding tooling is fixed by eccentric structure and inserting tooling, it's helpful for reducing the vibration during winding process. The windings/coils are put into the inserting tooling automatically. At the winding unit, it completes automatic jump, automatic hook and cut wire, automatic indexing. The winding tension is adjustable, the winding unit has enamel scratch detection alarm function.
The wedge making station: servo feeding, servo cutting, it regularly clean the wedge chips automatically, it's helpful for avoid wedge stuck, and helpful for machine stable running.
The inserting station: servo inserting, the winding/coil pushing height and wedge pushing height is set on the touch screen.
This four stations are driven by cam clearance divider, they work simultaneously and no interference to each other. It's labor-cost saving and high efficiency.
Stator stack length: 30-140 mm
Wire diameter: Φ0.31-1.2 mm(enamel layer is not included)
Adapts AC servo motor system as the power source for winding, module dipping, cup dividing, wire hooking and cutting, wedge feeding and cutting, and adapts three phase frequency converter reducer as the power source for turntable indexing.
Adapts servo motor control the main spindle, it can set acceleration and deceleration time, the turn No. accuracy is ±1 turn.
Winding head: 1~3pcs, max. 3pcs wire parallel winding.
No obvious vibration or noise.
Winding is tidy, no damage or peel-off for the enamel, the machine will stop once the copper wire is finished.
Wire Hooking and cutting XY axis front-back Left-right motion are servo motion system controlled, the across wire and lead wire length is adjustable.
Module dipping is controlled by servo system, Max.4 section.
Flyer swing diameter: 300mm
Max. 20sets winding data can be saved on the touch screen
The inserting tooling exchanges between the four stations adapt cam indexing unit, adapts frequency converter to control the speed.
The rotation motion of the Winding flyer is driven by 2pcs 3KW servo motor.
The up-down of the winding tooling is driven by 2pcs 1kw servo motor.
The left-right front-back of the wire hooking arm is driven by 4pcs 0.75kw servo motor.
The wedge is feeding by servo motor, the wedge inserting slot can be set. The wedge can be cut in set length.
Production cycle time: 40sec/pc(auxiliary working time is not included).
Material of the critical parts of the tooling: SKD61(Korea) tooling steel.
The tooling is changeable.
The winding unit, wedge feeding unit, coil pushing unit and inserting unit has speed pre-reducing function.
The winding speed, module dipping speed, wire hooking arm moving speed, wedge making speed, turntable indexing speed, inserting pushing-up speed and stop time can be set on the touch screen.
No damage, moving or incline problem for the wedge, the wire can't come out of the insulation paper.
Machine weight: 4500Kg
Power source: 380V±10%, three phase four wires
Air pressure: 0.6~0.8MPa
Main controller: Taiwan Yitu CNC motion system
Servo motor and driver: Schneider
Sensor: Omron, Autonics
Motion control switch: Schneider
Relay: Japan IDEC
Touch screen: Kunlun Tongtai
Pneumatic parts: Airtac
Frequency converter: Schneider
Other parts: Tend, Delixi, Schneider
Use grating as the protection device, standing operation.
3pcs inserting blade, 3pcs wedge depot blade, 3pcs pusher, 2pcs winding rod